Connecting kitchen wall units

Instructions:

Now clamp the units together at the top and bottom ensuring the faces of the gables are flush using your thumb as shown, the same method we used with our base units. Then pilot drill the holes in front of the hinge plates as shown and using the correct length screws you can fix the units together. The screws will again be hidden by the door hinge once the door is fitted. You can now remove the clamps and re fit the corner unit panel. Using the methods as before we can fit the return unit ready for the corner post to be fitted. As before we will be cutting the corner filler and its back panel to size. Ensure the return unit is level and square before cutting the corner post. The corner filler and back panel will be cut to the same width but with wall units the back panel will be 5mm longer than the corner filler, 2.5 millimetres at the top and 2.5 millimetres at the bottom as shown here.