Attaching kitchen doors and drawers

Instructions:

To attach the drawers simply place the drawer on top of the runners and push the drawer closed as shown. To replace the doors simply push the locating bar on the hinge into the two notches on the hinge plate and push firmly on the back of the hinge as shown. If in doubt you can refer to the instructions on our website showing diagrams and images explaining how to fit our doors and drawers along with instructions on adjusting the doors and drawers. Remember to fit the adhesive buffers to the back of the drawer fronts , this will ensure that the front of the drawer is level with the front of the door and will also act as a buffer when the door closes onto the carcase. You can now see that the corner post fits neatly and that the doors and drawers are all level. By offering up an off cut of worktop you can see how the finished corner will look. The drawer front can be moved from side to side / up and down or anti clock wise and clock wise by following our online instructions. The door can also be adjusted side to side / clockwise or anticlockwise as well as in or out. You will see here why it is important to cut the correct size corner post to ensure that the drawer doesn’t clash with the handle. The handle when fitted needs to be shallower than the depth of the corner post. The corner unit needs to be fitted so the door can open to at least 90 degrees without clashing with any handles as shown here.